JT Sprockets: front and rear sprockets for your motorcycle
JT Sprockets offers front and rear sprockets for motorcycles and ATVs. Its official catalogue distinguishes steel options, rubber-cushioned front sprockets and RaceLite aluminium rear sprockets. Each family serves a specific drivetrain configuration: the part and its mounting must match the vehicle and the other components installed.
At Motárea, you can go directly to front sprockets, rear sprockets and sprocket carriers. First choose the part you need, then check its specifications and compatibility. A similar appearance, a close diameter or the same tooth count does not guarantee that two parts are interchangeable.
Front sprockets: pitch, teeth and mounting
The front sprockets transmit motion to the chain. When selecting one, check the pitch, tooth count, shaft splines, offset and retention system. These details must match your motorcycle’s drivetrain and leave the necessary clearance around nearby components.
The official range includes rubber-cushioned front sprockets and self-cleaning designs. These options do not mean that every part has the same mounting. Check the specific product information and the manufacturer’s instructions before replacing the part or changing the gearing.
Steel and aluminium rear sprockets
The rear sprockets work with the chain and front sprocket. The catalogue includes parts with different materials and geometries. Selection requires checking the mounting, sprocket position, chain pitch and tooth count, rather than relying solely on the material or external finish.
The RaceLite family uses CNC-machined 7075-T6 aluminium. When comparing options, check each product’s specifications and application. Changing the tooth count alters the final drive ratio and may require another check of chain length, wheel adjustment and clearances throughout the assembly.
Sprocket carriers and assembly
The sprocket carriers secure the rear sprocket to the systems for which they are designed. Check the exact application and the match between carrier, sprocket and mounting hardware. The carrier and rear sprocket are separate components; check what each part includes before planning the installation.
Before renewing the drivetrain, also check the condition of the chain and both toothed components. Follow the mounting, tightening, alignment and tensioning instructions specified for your vehicle. Compatibility must be checked for the complete assembly and for the parts actually installed.
No hemos podido actualizar los productos. Puedes volver a intentarlo.












